For heat pump, furnace, and AC repair in Eagle, ID, Quality Heating & Cooling sends technicians to homes and businesses from Downtown Eagle to Island Woods. Replacement, new installation, and seasonal tune-ups are part of the same service. To get on the schedule, call 208-377-3555 or request service online.
When a heat pump or furnace quits overnight, you can reach us 24/7 for emergency repair, and a technician will explain what is wrong and what your options are.
Family-Owned Since 1976 | BBB A+ Accredited Since 1978 | Carrier Factory Authorized Dealer | 4.9 Stars on Google from 500+ Reviews
Heat Pump Repair, Service, and Installation
A heat pump that blows cool air in heating mode, ices over, short cycles, or runs all day without catching up needs a diagnosis, not a guess. We service and repair heat pumps, checking the outdoor unit, defrost operation, airflow, refrigerant circuit, and controls before explaining what we found. That covers heat pump repair, replacement through heat pump installation, and scheduled heat pump maintenance.
A heat pump in Two Rivers that ices over in the morning and one in Eagle Hills that never reaches the set temperature are different problems, and each repair starts with the symptom rather than a sales pitch. Age and sizing come up after the diagnosis, when you are deciding between a repair and a replacement.
Furnace Replacement and Repair
When a furnace is past repairing, replacement starts with the house: its size, the ductwork, the venting and gas connections, and how the household uses each floor. New furnace installation includes startup and testing. If the existing unit can still be saved, furnace repair covers faults in the ignition, flame sensor, blower, limit switch, or thermostat.
Replacing a furnace in a Banbury home is also the moment to ask whether the ducts, thermostat, and filtration still suit the house. We raise those questions during the evaluation so the new furnace is not asked to work around old limits.
Air Conditioning Repair and Installation
AC trouble usually announces itself as warm air, ice on the refrigerant lines, a unit that will not start, or rooms that never cool down. We test the electrical components, refrigerant circuit, airflow, and controls, tell you which one failed, and give you the air conditioning repair price alongside the cost of replacing the system. Replacement jobs get a plan built around your existing ducts, electrical service, and equipment location, and air conditioner installation follows from there.
A Rivers End homeowner comparing a repair quote with a replacement quote should see both side by side, along with the equipment’s age and condition. That comparison is what we put on the table, so the decision rests on the numbers rather than on pressure.
Ductless Mini-Split Installation and Repair
If part of the house is never comfortable and the ducts cannot reach it, a ductless mini-split is often the practical fix. Each indoor unit has its own thermostat, and a small outdoor unit connects to it by a line set instead of ductwork, with capacity matched to the room. We install new ductless systems, repair units that have stopped cooling or started leaking, and maintain the ones you have.
A detached studio or workshop behind a Westover Lakes home has no ducts to tap, which is where a ductless system tends to earn its place. We size it to the room and its use, then set the indoor unit where it serves the space best.
Air Duct Repair, Sealing, and Installation
A duct inspection compares what the system is meant to deliver with what actually reaches each room. We look at joints and connections, crushed or kinked runs, and branches too small for the space, and we measure airflow at the registers. The fix may be sealing, repairing a section, or replacing a run, and we also install new air duct systems for additions and remodels.
If your house near Heritage Park has changed since the ducts were laid out, those register readings are where we start, before anyone suggests new equipment.
HVAC Maintenance and Tune-Ups
A maintenance visit is a checklist and a conversation. The technician tests electrical connections and controls, cleans and inspects the coils and blower, checks the burners or defrost controls, clears the condensate drain, and changes or inspects the filter, then tells you what to watch before the next season. Book a single visit, or enroll in the annual maintenance plan and the spring and fall visits come around on their own.
Book the cooling visit before Eagle Saturday Market season starts and the heating visit before the first cold snap, and both are easier to fit into your week than an emergency call.
Commercial HVAC Repair and Maintenance
A commercial call starts with the building: the type of equipment, its age, and the hours the business keeps. From there our team handles repair, replacement, and ongoing maintenance of commercial HVAC systems, arranging visits around opening hours where the job allows. We serve shops, salons, and professional offices throughout Eagle.
For a salon or professional suite on State Street, we plan service around appointments and opening hours, because a unit that quits mid-day costs more than a quiet morning visit.
Zone Control Systems
Zoning only works when the ducts and equipment can support it, so the first visit is a check, not a pitch. If the system can handle it, we add motorized dampers and extra thermostats so separate areas of the home hold their own temperatures, and we repair and service zone control systems already installed. When the real issue is the ductwork or the equipment, we will say that plainly.
A multi-level home in Eagle Ridge, where the second floor runs warmer than the first, is a natural place to ask about zoning, and we start by looking at the ducts.
Indoor Air Quality and Filtration
Air quality work starts with the HVAC equipment already in the house, since filters, air cleaners, and ventilation all have to work with its airflow and controls. We recommend the option that fits your system and your main concern, whether that is dust, pet dander, pollen, or smoke, under our indoor air quality service.
If you are in Three Rivers Ranch and wondering whether a higher-grade filter would even fit your system, the first step is to check what the equipment can handle.
Whole-House Humidifier and Dehumidifier Services
Humidity control works in two directions. A humidifier adds moisture to the air your furnace moves, and a dehumidifier removes it when the house feels clammy. We service both types from installation through replacement, and a whole-house humidifier is set up to work alongside your heating system.
A finished basement in Lexington Hills that turns damp in spring is a good example of where a dehumidifier enters the conversation, alongside the question of why the moisture is there.
Water Heater Repair, Replacement, and Installation
Hot water problems fall into two groups: a unit that has stopped doing its job, and a household that has outgrown it. We repair and replace tank and tankless water heaters and set up water heaters in remodels and new builds, sizing capacity to the people and fixtures in the home. During a visit we weigh the unit’s age and condition against the cost of repair.
A remodel in Park Lane Estates that adds a soaking tub changes the hot water demand, which is why we size the unit to the new layout rather than the old one.
Gas Fireplace Installation, Repair, and Maintenance
Annual gas fireplace maintenance covers the burner, pilot or igniter, glass, gasket, blower, and venting, which is also when small problems get caught before the first cold night. We install new units too, and we repair gas fireplace faults such as a pilot that will not stay lit or a blower that has turned noisy.
Few things feel better than coming home to a lit fireplace after a cold afternoon at the Eagle Sports Complex, and a diagnostic visit is how we get yours working again.
Geothermal Heat Pump Services
Geothermal is a long-term decision, so we start with three questions: is there room on the property for the buried piping, how long do you plan to stay, and what does your current system cost to run? We install, repair, replace, and maintain geothermal heat pump systems, and a site visit comes before any recommendation.
Eagle properties with larger lots, like some near Molinari Park, give a geothermal loop more room to work with, and we use your current operating costs as the baseline for the comparison.
Why Eagle Homeowners Choose Quality Heating & Cooling
Wayne and Judy Van Cleave founded Quality Heating & Cooling in 1976, and the company is still family-owned and operated, run today by Judy and her children. It has served Boise and the Treasure Valley ever since.
As a BBB-accredited business with an A+ rating and accreditation dating to 1978, we are also a Carrier Factory Authorized Dealer. Customers rate the company 4.9 stars on Google across more than 500 reviews.
Heat Pump, Furnace, and Fireplace Questions From Eagle Homeowners
What does heat pump service include for an Eagle home?
A heat pump service visit covers the outdoor coil and fan, indoor coil and filter, blower, electrical connections, defrost controls, condensate drain, and thermostat settings, plus a check of how the system is running in both heating and cooling modes. The technician reports what needs attention and what can wait.
Why is my heat pump blowing cool air in my Eagle home?
First confirm the thermostat is set to heat and the filter is clean. A short burst of cooler air while the outdoor unit clears frost is a normal part of a defrost cycle on many heat pumps. If the air stays cool for long stretches, or the outdoor unit is iced over, switch the system off and call for service.
What should I expect when replacing a furnace in my Eagle home?
Expect a home evaluation first: sizing, ductwork condition, venting, gas connections, and the thermostat. Next come equipment recommendations, an installation date, and a startup and test once the new unit is in. Ask about the duct system during the visit, since a new furnace works with the airflow it is given.
Why won’t my gas fireplace stay lit in my Eagle home?
Common causes include a weak pilot flame, a worn thermocouple or flame sensor, a dirty burner, or a gas valve or switch fault. Do not try to bypass safety controls. If you smell gas, leave the home and call your gas utility or 911 from outside. For everything else, a technician can inspect the unit and explain the repair.
Why does my furnace keep turning on and off in my Eagle home?
A furnace that cycles on and off every few minutes is short cycling. Common causes include a dirty filter or restricted airflow, a thermostat problem, or a safety limit tripping because the furnace is overheating. Replace a dirty filter first. If it keeps happening, switch the furnace off and call, since a tripped limit is protecting the equipment.
Schedule Heat Pump, Furnace, or AC Service in Eagle
If your system has stopped keeping up or started making new noises, a visit will tell you why. Reach us at 208-377-3555 or through request service online for heat pump, furnace, AC, or commercial HVAC service anywhere in Eagle.